FFConfigLite

Diagnose and configure Ford Focus 2 and C-Max I modules using ELM327 or ELS27. These interfaces allow access to CAN-bus modules:

Engine Control Module (ECM): Retrieve module information, read and clear diagnostic trouble codes (DTCs), reboot the module, and reset the long-term fuel trim (KAM)* for the following engines: ESU-411/418 (1.8 125/2.0 145), SIM28/29 (1.4 80/1.6 100/115), and ESU-121/131 (1.8 120/2.0 145).

Instrument Panel Cluster (IPC): Access module information, read and clear DTCs, configure the module, reboot it, change the odometer reading, and perform odometer correction*.

Brake Control Module (BCM): Retrieve module information, read and clear DTCs, configure the module, reboot it, reset the Dynamic Damper System (DDS) calibration, and perform brake bleeding*.

Body Control Module (BCM): Access module information, read and clear DTCs, configure the module*, and reboot it.

Airbag Control Module (ACM): Retrieve module information, read and clear DTCs, configure the module, reboot it, and clear crash data*.

Transmission Control Module (TCM): Access module information, read and clear DTCs, and reset KAM*.

Climate Control Module (CCM): Retrieve module information, read and clear DTCs.

Audio Control Module: Access module information, read and clear DTCs, and retrieve the radio code (for M-series)*.

*Some features are only available in the full version.

To unlock full application functionality and access additional modules, a minor modification to the ELM327 adapter is required. Instructions can be found here: [ttpp]

ELS27 can be purchased at: [yyxx]. For ELS27USB, set the baud rate to 38400; for ELS27BT, use the ELS27 Baudrate utility to set it to 2,000,000.

Screenshot